Panasonic LF-D321 Driver software installation, Click Installation software for DVD-RAM/R drive

ENGLISH

Driver software installation

Windows 98 / Windows Me

1Insert the supplied CD-ROM (VFF0128 or VFF0129) into the DVD-RAM/R

drive.

The installation program starts automatically.

•If the installation program does not start automatically, start it manually by following the proce- dure below.

(This assumes that the drive letter assigned to the DVD-RAM/R drive for CD-ROM media is E:.)

From the Start menu select [Run].

In the “Open” box, enter “e:\setup.exe”.

Click [OK].

The installation program starts.

2Click [Installation software for DVD-RAM/R drive].

•For installation of application soft- ware, refer to pages 98, 104, or 112.

(A) in case of VFF0128 (B) in case of VFF0129

40

VQT9473

3 When the dialog at right is displayed, select “Driver Soft (Mandatory)”.

•Select the applications you want to install.

•The Q&A file is installed if you click on “Q&A” (refer to page 124).

Click on [Install].

Installation begins.

•Follow the on-screen instructions to proceed.

4After installation,

Select “Yes, I want to restart my com- puter now”.

Click [Finish].

The computer now reboots.

•You can use the DVD-RAM/R drive after rebooting.

•To verify that the drivers were installed correctly, refer to “Checks after installation” on pages 46 and 48.

(Continued on the next page)