VQT9473
42
ENGLISH
(Continued on the next page)
Windows 2000
1
From the Start menu select [Run].
In the “Open” box, enter “e:\setup.exe”.
Click [OK].
The installation program starts.
2
3
4
Insert the supplied CD-ROM (VFF0128 or VFF0129) into the DVD-RAM/R drive.
The installation program starts automatically.
•If the installation program does not start automatically, start it manually by following the proce-
dure below.
(This assumes that the drive letter assigned to the DVD-RAM/R drive for CD-ROM media is
E:.)
Click [Installation software for
DVD-RAM/R drive].
•For installation of application soft-
ware, refer to pages 98, 104 or 112.
When the dialog at right is displayed,
select “Driver Soft (Mandatory)”.
•Select the applications you want to install.
•The Q&A file is installed if you click on “Q&A”
(refer to page 124).
Click on [Install].
Installation begins.
•Follow the on-screen instructions to proceed.
After installation
Click [Finish].
(A) in case of VFF0128 (B) in case of VFF0129