Patton electronic 2800 Devoting the service policy profile to an interface, Policy name in out

OnSite 2800 Series User Manual 8 • Link scheduler configuration

Devoting the service policy profile to an interface

Any service policy profile needs to be bound to a certain IP interface to get activated. According the terminol- ogy of OnSite a service policy profile is used on a certain IP interface, as shown in figure 23.

Service
Policy	Context
Profile
	IP
	“router”
use command

bind command

Ethernet

PVC Serial

Figure 23. Using a Service Policy Profile on an IP Interface

Therefore the use profile service-policycommand allows attaching a certain service policy profile to an IP interface that is defined within the IP context. This command has an optional argument that defines whether the service policy profile is activated in receive or transmit direction.

Providers may use input shaping to improve downlink voice jitter in the absence of voice support. The default setting no service-policysets the interface to FIFO queuing.

Mode: Interface

Step	Command	Purpose
1	node(if-ip)[if-name]#use profile service-	Applies the service policy profile name to the
	policy name {in out}	selected interface if-name. Depending on select-
		ing the optional in or out argument the service
		policy profile is active on the receive or transmit
		direction. Be aware that service policy profiles
		can only be activated on the transmit direction at
		the moment.

Example: Devoting the service policy profile to an interface

The following example shows how to attach the service policy profile Voice_Prio to the IP interface wan that is defined within the IP context for outgoing traffic.

Link scheduler configuration task list 109