![](/images/new-backgrounds/1190993/19099369x1.webp)
OnSite 2800 Series User Manual | 2 • Hardware installation |
|
|
Note
WARNING
CAUTION
Pins not listed are not used.
Hazardous network voltages are present in the PRI cables. If you detach the cable, detach the end away from the OnSite first to avoid possible electric shock. Network hazardous voltages may be present on the device in the area of the PRI port, regardless of power being on or off.
To prevent damage to the system, make certain you connect the PRI cable to the PRI port only and not to any other RJ type recep- tacle.
Installing the E1 dual coaxial cables. If the PBX or switch connection provides dual coaxial cables for the E1 connection, the transmit cable from the PBX/switch connects to the RX coaxial connector. Similarly, the receive cable from the PBX/switch connects to the TX coaxial connector.
Figure 6. Rear panel of 2803K/UI
WARNING
CAUTION
Hazardous network voltages are present in the PRI cables. If you detach the cable, detach the end away from the OnSite first to avoid possible electric shock. Network hazardous voltages may be present on the device in the area of the PRI port, regardless of power being on or off.
To prevent damage to the system, make certain you connect the PRI cable to the PRI port only and not to any other RJ type recep- tacle.
Installing the VPN router | 35 |