![](/images/new-backgrounds/1190993/190993107x1.webp)
OnSite 2800 Series User Manual | 4 • Serial port configuration |
|
|
Displaying Frame Relay information
Since Frame Relay configuration for the serial interface is complex and requires many commands, it is helpful to list the frame relay configuration on screen.
This procedure describes how to display the Frame Relay configuration settings for the serial interface.
Mode: Port serial
Step | Command | Purpose |
|
|
|
1
Example: Displaying Frame Relay information
The following example shows the commands used to display Frame Relay configuration settings.
2800>enable
2800#configure 2800(cfg)#show framerelay
Framerelay Configuration: |
|
|
| ||
Port |
| Keepalive | Fragmentation | ||
serial 0 0 0 | ansi |
| 10 | disabled |
|
PVC Configuration: |
|
|
|
| |
Port | DLCI | State | Fragment | Encaps | Binding |
serial 0 0 0 | 1 | open | disabled rfc1490 wan@router |
Serial port configuration task list | 54 |