![](/images/new-backgrounds/1190993/190993221x1.webp)
OnSite 2800 Series User Manual | 8 • Link scheduler configuration |
|
|
The command has optional values (in the range of 1 to 4) that define the level of detail (see table 13).
Table 13. Values defining detail of the queuing statistics
Optional Value Implication on Command Output
0Statistic gathering is switched off
1Display amount of packets passed (did not have to wait), queued (arrived ear- lier than rate permitted) and discarded (due to overflowing queue)
2Also collects byte counts for the catego- ries listed above
3Also keeps track of the peek queue lengths ever reached since the last con- figuration change or reload
4Adds delay time monitoring
Note The debug features offered by OnSite require the CPU resources of your OnSite router. Therefore do not enable statistic gathering or other debug features if it is not necessary. Disable any debug feature after use with the no form of the command.
You can enable queue statistics for all queues of a link scheduler by placing the debug queue statistics com- mand in the profile header. Queue statistics are reset whenever the configuration is changed or OnSite is reloaded.
Mode: Source
Step | Command | Purpose |
|
|
|
1node(src)[name]#debug queue statistics level Enables statistic gathering for the selected class or policy name. The optional argument level, which is in the range from 1 to 4, defines the ver- bosity of the command output.
Example: Enable statistics gathering for all queues of a profile
The following example shows how to enable statistic gathering for all
2800>enable
2800#configure
2800(cfg)#profile
Link scheduler configuration task list | 111 |