Patton electronic 2800 user manual Configure the serial interface settings, Port

OnSite 2800 Series User Manual 4 • Serial port configuration

Port

Ethernet

0 0

	IP interface
	external
IP interface	192.168.2.1
lan	Context
	IP
192.168.1.1	“router”
	192.168.3.1
	IP interface
	external

PVC 1

PVC 2

Port

Serial

0 0

Port

Serial

0 0

Figure 14. IP Context with logical IP interfaces bound to Ethernet port, serial port PVC 1 and PVC 2

The related IP, serial interface and Frame Relay configuration procedure is listed below. Where necessary, comments are added to the configuration for better understanding.

1.Enter the configuration mode.

2800>enable

2800#configure

…

2.Set up the IP interface configuration first. Be aware that not all of the necessary settings are listed below.

2800(cfg)#context ip router 2800(ctx-ip)[router]#interface external 2800(if-ip)[external]#interface internal 2800(if-ip)[internal]#interface lan 2800(if-ip)[lan]#exit 2800(ctx-ip)[router]#interface internal 2800(if-ip)[internal]#ipaddress 192.168.3.1 255.255.255.0 2800(if-ip)[internal]#interface external 2800(if-ip)[external]#ipaddress 192.168.2.1 255.255.255.0 2800(if-ip)[external]#interface lan 2800(if-ip)[lan]#ipaddress 192.168.1.1 255.255.255.0

…

3.Configure the serial interface settings.

2800(cfg)#port serial 0 0 2800(prt-ser)[0/0]#shutdown 2800(prt-ser)[0/0]#encapsulation framerelay

…

4.Configure the Frame Relay. You must thus change to the Frame Relay configuration mode. Use the ser- vice-policy profile defined above to give voice priority over data.

2800(prt-ser)[0/0]#framerelay 2800(frm-rel)[0/0]#lmi-type ansi 2800(frm-rel)[0/0]#keepalive 20

…

Serial port configuration task list 56