OnSite 2800 Series User Manual | 2 • Hardware installation |
|
|
Site log
Patton recommends that you maintain a site log to record all actions relevant to the system, if you do not already keep such a log. Site log entries should include information such as listed in table 4.
| Table 4. Sample site log entries |
|
|
Entry | Description |
|
|
Installation | Make a copy of the installation checklist and insert it into the site log |
|
|
Upgrades and maintenance | Use the site log to record ongoing maintenance and expansion history |
|
|
Configuration changes | Record all changes and the reasons for them |
|
|
Maintenance | Schedules, requirements, and procedures performed |
|
|
Comments | Notes, and problems |
|
|
Software | Changes and updates to OnSite software |
|
|
Network information
When planning your installation there are certain
Network Diagram
Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony components.
IP related information
Before you can set up the basic IP connectivity for your OnSite 2800 Series you should have the following information:
•IP addresses and subnet masks used for Ethernet LAN and WAN ports
•IP addresses and subnet masks used for the V.35 or X.21 serial WAN port
•IP addresses and subnet masks used for the T1/E1 WAN port
•IP addresses of central TFTP Server used for configuration upload and download
•Login and password for PPPoE Access.
Software tools
You will need a PC (or equivalent) with a
Power source
If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery with large motors nearby, have a qualified professional test the power. Install a power conditioner if necessary.
Planning the installation | 29 |
