Patton electronic 2800 user manual Enabling a Frame Relay PVC, Disabling a Frame Relay PVC

OnSite 2800 Series User Manual 4 • Serial port configuration

Enabling a Frame Relay PVC

After binding Framerelay PVC to an ip interface it must be enabled for packet processing. This procedure acti- vates the PVC by opening the bound ip interface.

This procedure describes how to enable Framerelay PVC for packet processing

Mode: PVC

Step	Command	Purpose
1	node(pvc)[dlci]#no shutdown	Enables the Frame Relay PVC

Example: Disabling a Frame Relay PVC

The following example enables Frame Relay PVC with the DLCI 1 on the serial interface on slot 0 and port 0.

2800(cfg)#port serial 0 0 2800(prt-ser)[0/0]#framerelay 2800(frm-rel)[0/0]#pvc 1 2800(pvc)[1]#no shutdown

Check the PVC 1 status using show running-configand verify that the entry no shutdown occurs in the con- figuration part responsible for this PVC.

2800(pvc)[1]#show running-config
Running configuration:
#----------------------------------------------------------------	#
#	#
…
pvc 1
encapsulation rfc1490
bind interface wan router
no shutdown

Disabling a Frame Relay PVC

Frame Relay PVCs can be disabled whenever it is necessary. Be aware that disabling a specific PVC also dis- ables the related serial interface and vice versa.

This procedure describes how to disable the Frame Relay PVC DLCI on the serial interface.

Mode: PVC

Step	Command	Purpose
1	node(pvc)[dlci]#shutdown	Disables the Frame Relay PVC DLCI.

Example: Disabling a Frame Relay PVC

The following example disables Frame Relay PVC 1 on the serial interface on slot 0 and port 0 of an OnSite router.

2800(cfg)#port serial 0 0 2800(prt-ser)[0/0]#framerelay

Serial port configuration task list 52