4Edit the macro.
To move or delete a command: Tap the command to select it, then tap Delete or an arrow button.
To record more commands: Go to the device controls and enter the commands. When you return to the macro, the new commands automatically appear at the end of the macro.
NOTE The Go command, if any, is always at the end of the macro list.
5Add delays, if needed.
Tap the Delay button to insert a new delay at the end of the macro.
Delay
Decrease or increase the length of the delay.
Move the delay up in the command list.
Use + and – to increase the length of the delay. Use the arrow buttons to move the delay to the right place.
6When you’re done, tap the Left button (labeled CLOSE) to close the macro and return to Use mode.
A message asks you if you want to save your changes. Tap the Save Macro button to save your changes and return to Use mode.
58Chapter
