CHAPTER 8

8 Command Reference

This chapter describes the controls for the remote control’s built-in devices. One kind of devices is included with the remote control:

• Devices that appear on the Device menu

NOTE This chapter describes the default setup. If a dealer or installation technician programmed the remote control for you, the devices and controls might be different.

ACTIVE BUTTONS AND TEMPLATE BUTTONS

Some of the buttons listed here don’t have commands assigned to them; they are placeholders for optional functions. These template buttons are invisible in Use mode. In Learn mode they become visible so that you can teach them commands. A button with no command assignment is light gray. An active button—a button that has a command assigned to it—is dark and looks three- dimensional.

Active buttons

(visible in Use mode)

Template buttons

(visible only in Learn mode)

The active buttons that are shown in this chapter have RC codes assigned to them by default. The command description for each active button tells you what the RC code does. For template buttons, the command description tells you the intended use of the button. However, you can teach any command to any button.

Chapter 8 — Command Reference

75

Page 77
Image 77
Philips intelligent remote control manual Command Reference