Polycom 2000 7-13, 6Click the Video Quality tab.

Polycom RMX 2000 Administrator’s Guide
7-13
6Click the Video Quality tab.
Auto Terminate When selected (default), the conference automatically
ends when the termination conditions are met:
Before First Joins — No participant has connected to
a conference during the n minutes after it started.
Default idle time is 10 minutes.
At the End - After Last Quits — All the participants
have disconnected from the conference and the
conference is idle (empty) for the predefined time
period. Default idle time is 1 minute.
At the End - When Last Participant Remains —
Only one participant is still connected to the
conference for the predefined time period (excluding
the recording link which is not considered a participant
when this option is selected). This option should be
selected when defining a Profile that will be used for
Gateway Calls and you want to ensure that the call is
automatically terminated when only one participant is
connected. Default idle time is 1 minute.
Note: The selection of this option is automatically
cleared and disabled when the Operator Conference
option is selected. The Operator conference cannot
automatically end unless it is terminated by the RMX
User.
Echo
Suppression
When enabled (default), an algorithm is used to search
for and detect echo outside the normal range of human
speech (such as echo) and automatically mute them
when detected.
Clear this option to disable the Echo Suppression
algorithm.
Note: This option is activated only in MPM+ Card
Configuration Mode.
Keyboard Noise
Suppression
When enabled, an algorithm is used to search for and
detect keyboard noises and automatically mute them
when detected.
Note: This option is activated only in MPM+ Card
Configuration Mode.
Table 7-2 New Profile - Advanced Parameters (Continued)
Field/Option Description