Chapter 16-RMX Administration and Utilities
16-64
Defining the SNMP Parameters in the RMX
The SNMP option is enabled via the RMX Web Client application.
The addresses of the Managers monitoring the MCU and other security
information are defined in the RMX Web Client application and are saved
on the MCU’s hard disk. Only users defined as Administrator can define
or modify the SNMP security parameters in the RMX Web Client
application.
To enable SNMP option:
1In the RMX Web Client menu bar, click Setup>SNMP.
The RMX-SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU
that will be used by the SNMP system to identify it.