Polycom RMX 2000 Administrator’s Guide
15-25
Direct Dialing from ISDN/PSTN Endpoint to IP Endpoint via a Meeting Room
Dialing from an ISDN endpoint to a specific IP endpoint using the
Gateway Profile is a two-step process (dialing to the Gateway and then
entering the number of the destination IP endpoint).
When dialing to specific IP endpoints you can simplify the dialing process
by creating the appropriate Meeting Room.
If CMA is involved, dialing can be simplified even further by configuring
the appropriate dialing Rule in the CMA.
To set up the Meeting Room for direct dialing in:
Set the conference parameters in the Conference Profile and make sure
that the conference will automatically end when there is only one
participant connected to the meeting.
Define the Meeting Room with the following:
• Conference Profile in which the Auto Terminate - At the end - When
Last Participant Remains option is selected. For more details on
Conference Profile definition, see "Defining the Conference Profile for
Gateway Calls” on page15-16.