Polycom 2000 12-31, 3Define the following parameters: , 4Click Next.,

Polycom RMX 2000 Administrator’s Guide
12-31
3Define the following parameters:
4Click Next.
Table 12-13 ISDN Service Settings
Field Description
Network Service
Name
Specify the service provider’s (carrier) name or any
other name you choose, using up to 20 characters.
The Network Service Name identifies the ISDN/PSTN
Service to the system.
Default name: ISDN/PSTN Service
Note: This field is displayed in all ISDN/PSTN
Network Properties tabs and can contain character
sets that use Unicode encoding.
Span Type Select the type of spans (ISDN/PSTN) lines, supplied
by the service provider, that are connected to the
RMX. Each span can be defined as a separate
Network Service, or all the spans from the same
carrier can be defined as part of the same Network
Service.
Select either:
•T1 (U.S. – 23 B channels + 1 D channel)
•E1 (Europe – 30 B channels + 1 D channel)
Default: T1
Service Type PRI is the only supported service type. It is
automatically selected.