Appendix B-Alarms and Faults
B-12
SIP TLS: Registration server not
responding
This alarm is displayed when the RMX does not receive
a response from the OCS to the registration request in
the expected time frame. Possible causes are:
•The RMX FQDN name is not defined in the OCS
pool, or is defined incorrectly.
•The time frame for the expected response was too
short and it will be updated with the next data refresh.
The alarm may be cleared automatically the next
time the data is refreshed.
•The RMX FQDN name is not defined in the DNS
server. Ping the DNS using the RMX FQDN name to
ensure that the RMX is correctly registered to the
DNS.
SIP TLS: Certificate has expired The current TLS certificate files have expired and must
be replaced with new files.
SIP TLS: Certificate is about to expire The current TLS certificate files will expire shortly and
will have to be replaced to ensure the communication
with the OCS.
SIP TLS: Certificate subject name is not
valid or DNS failed to resolve this name
This alarm is displayed if the name of the RMX in the
certificate file is different from the FQDN name defined in
the OCS.
Smart Report found errors on hard disk Smart Report found errors on hard disk.
SSH is enabled
Startup process failure Process failed:
[Process name] failed to start.
SWITCH not responding
System Configuration modified System configuration flags were modified.
Reset the MCU.
Task terminated Task terminated: [Task Name].
Table B-1 Alarms (Continued)
Alarm Code Alarm Description