Chapter 2-Additional Conferencing Information
2-34
Encryption Flag Settings
To modify the Encryption flag:
1Click Setup>System Configuration.
The System Flags dialog box opens.
2Set the ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF
flag to YES or NO.
3Click OK.
For more information, see "System Configuration” on page16-10.
Reset the MCU for flag changes to take effect.
Enabling Encryption in the Profile
Encryption for the conference is in the Profile and cannot be changed once
the conference is running.
To enable encryption at the conference level:
In the Conference Profile Properties – Advanced dialog box, select the
Encryption check box.