Chapter 12-Network Services
12-22
Transport Type Select the protocol that is used for signaling
between the MCU and the SIP Server or the
endpoints according to the protocol supported by
the SIP Server:
UDP – Select this option to use UDP for signaling.
TCP – Select this option to use TCP for signaling.
TLS – The Signaling Host listens on secured
port 5061 only and all outgoing connections are established on secured connections. Calls from SIP clients or servers to non secured ports are rejected.
The following protocols are supported: TLS 1.0,
SSL 2.0 and SSL 3.0.
This is the required Mode for Microsoft environment.
For more details, see Appendix I, ”Defining a SIP
Network Service in the RMX” on page I-20
SIP Servers: Primary / Alternate Server
Server IP Address Enter the IP address of the preferred SIP server.
Server Domain
Name
Enter the name of the domain that you are using for
conferences, for example:
user_name@domain name
The domain name is used for identifying the SIP
server in the appropriate domain according to the
host part in the dialed string.
For example, when a call to EQ1@polycom.com
reaches its outbound proxy, this proxy looks for the
SIP server in the polycom.com domain, to which it
will forward the call.
When this call arrives at the SIP server in
polycom.com, the server looks for the registered
user (EQ1) and forwards the call to this Entry Queue
or conference.
Table 12-9 Default IP Service – Conferencing – SIP Servers Parameters
(Continued)
Field Description