Chapter 16-RMX Administration and Utilities
16-284Click OK to close the New Flag dialog box.The new flag is added to the flags list.SEND_WIDE_RES_TO_
IP
When set to YES (default), the RMX sends
wide screen resolution to IP endpoints.
Endpoint types that do not support wide
screen resolutions are automatically identified
by the RMX according to their product type
and version and will not receive the wide
resolution even when the flag is set to YES.
When manually added and set to NO, the
RMX does not send wide screen resolution to
all IP endpoints.
Default: YES.
DISABLE_WIDE_RES_
TO_SIP_DIAL_OUT
When set to NO (default), the RMX sends
wide screen resolution to dial-out SIP
endpoints. Endpoint types that do not support
wide screen resolutions are automatically
identified by the RMX according to their
product type and version and will not receive
the wide resolution even if the flag is set to
YES.
When manually added and set to YES, the
RMX does not send wide screen.
Default: NO.
FORCE_RESOLUTION Use this flag to specify IP (H.323 and SIP)
endpoint types that cannot receive wide
screen resolution and that were not
automatically identified as such by the RMX.
Possible values are endpoint types, each type
followed by a semicolon. For example, when
disabling Wide screen resolution in an HDX
endpoint enter the following string: HDX;
Note: Use this flag when the flag
SEND_WIDE_RES_TO_IP is set to YES.
Table 16-4 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description