Polycom RMX 2000 Administrator’s Guide
16-25H245_TUNNELING For use in the Avaya Environment.
This flag is defined in the System Flags –
CS_MODULE_PARAMETERS section.
In the Avaya Environment, set the flag to YES
to ensure that H.245 is tunneled through
H.225. Both H.245 and H.225 will use the
same signaling port.
Default: NO.
H239_FORCE_
CAPABILITIES
When the flag is set to NO, the RMX only
verifies that the endpoint supports the Content
protocols: Up to H.264 or H.263.
When set to YES, the RMX checks frame rate,
resolution and all other parameters of the
Content mode as declared by an endpoint
before receiving or transmitting content.
Default: NO.
ENABLE_H239 When set to YES, Content is sent via a
separate Content channel. Endpoints that do
not support H.239 Content sharing will not be
able to receive Content
When set to NO, the Content channel is
closed. In such a case, H.239 Content is sent
via the video channel (“people” video)
enabling endpoints that do not support H.239
Content sharing to receive the Content in their
video channel.
Default: YES.
Table 16-4 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description