Chapter 16-RMX Administration and Utilities
16-58
Card Configuration
Mode
Indicates the MCU configuration as derived
from the installed media cards:
•MPM: Only MPM cards are supported.
MPM+ cards in the system are disabled. It
is the mode used in previous RMX
versions.
•MPM+: Only MPM+ cards are supported.
MPM cards in the system are disabled.
Note: When started with Version 4.0 installed,
the RMX enters MPM+ mode by default, even
if no media cards are installed:
•The RMX only switches between MPM and
MPM+ Card Configuration Modes if MPM/
MPM+ cards are removed or swapped
while it is powered on.
•The Card Configuration Mode switch
occurs during the next restart.
•Installing or swapping MPM/MPM+ cards
while the system is off will not cause a
mode switch when the system is restarted -
it will restart in the Card Configuration
Mode that was active previous to powering
down.
Table 16-12 System Information (Continued)
Field Description
•The RMX only switches between MPM and MPM+ Card Configuration
Modes if MPM/MPM+ cards are removed or swapped while it is running.
•The Card Configuration Mode switch occurs during the next restart.
•Installing or swapping MPM/MPM+ cards while the system is off will not
cause a mode switch when the system is restarted – it will restart in the Card
Configuration Mode that was active previous to powering down.