Polycom RMX 2000 Administrator’s Guide
13-19
18 Click the Roll Call tab.
The New Conference IVR Service - Roll Call dialog box opens.
The Roll Call feature of the Conference IVR Service is used to record
the participants’ names for playback when the participants join and
leave a conference.
When the system flag
IVR_ROLL_CALL_USE_TONES_INSTEAD_OF_VOICE is set to
YES, the system does not playback the Roll Call names when
participants enter or exit the conference. If the voice messages are
replaced with tones, the system will play these tones instead.
Conference is
Secured
This message is played when the conference status
changes to Secure as initiated by the conference
chairperson or participant (using DTMF code *71).
Conference is
unsecured
This message is played when the conference status
changes to Unsecured as initiated by the
conference chairperson or participant (using DTMF
code #71).
Conference is
Locked
This message is played to participants attempting to
join a Secured conference.
Enter Destination
ID
Prompts the calling participant for the destination
number. Default message prompts the participant
for the conference ID (same message as in the
Entry Queue IVR Service).
Incorrect
Destination ID
If the participant entered an incorrect conference ID
(in gateway calls it is the destination number),
requests the participant to enter the number again.
Dial Tone The tone that will be played to indicate a dialing
tone, to let the calling participant enter the
destination number.
Ringing Tone The tone that will be played to indicate that the
system is calling the destination number.
Table 13-6 Conference IVR Service Properties - General Voice Messages
(Continued)
Message Type Description