Chapter 2-Additional Conferencing Information
2-32
Conference access is set in the system configuration by the flag
ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF as follows:
Encrypted Entry Queue Access
To be able to join a conference from an Entry Queue as an encrypted
participant, encryption must be enabled in the Profile assigned to the
Entry Queue. All non-encrypted participants connecting to an encrypted
Entry Queue are disconnected from the MCU.
Encrypted participants can be moved from an encrypted Entry Queue to
the destination conference depending on the destination conference
settings and the setting of the flag in the system configuration.
Table 2-7 Participant Level Encryption According to Flag Settings
Flag Settings Encryption is enabled in
Profile
Encryption is disabled in
the Profile
YES Encryption is determined at
the participant level,
therefore encrypted and
non-encrypted participants
can join the conference.
Encryption is determined at
the participant level,
therefore encrypted and
non-encrypted participants
can join the conference.
NO Encryption is determined at
the conference level,
therefore only encrypted
participants can join the
conference.
Encryption is determined at
the conference level,
therefore only non-
encrypted participants can
join the conference.
Encrypted participants
cannot be moved from an
encrypted Entry Queue to
this conference.