Appendix C-CDR Fields - Unformatted File

C-16

Event Specific Fields

The following tables describe the fields which are specific to each type of

event.

Some fields that were supported by the MGC Manager, are not supported by the
RMX 2000. In addition, for some fields the RMX 2000 has a fixed value, whereas
the MGC Manager supported multiple values. For more information about the
MGC Manager fields and values, see the MGC Manager User’s Guide Volume I I,
Appendix A.
Table C-3 Event Fields for Event 1 - CONFERENCE START
Field Description
Dial-Out Manually Indicates whether the conference was a dial-out
manually conference or not.
Currently the only value is:
0 - The conference was not a dial-out manually
conference, that is, the MCU initiates the communication
with dial-out participants, and the user does not need to
connect them manually.
Auto Terminate Indicates whether the conference was set to end
automatically if no participant joins the conference for a
predefined time period after the conference starts, or if
all participants disconnect from the conference and the
conference is empty for a predefined time period.
Possible values are:
0 - The conference was not set to end automatically.
1 - The conference was set to end automatically.
Line Rate The conference line rate, as follows:
0 - 64 kbps
6 - 384 kbps
12 - 1920 kbps
13 - 128 kbps
15 - 256 kbps
23 - 512 kbps
24 - 768 kbps
26 - 1152 kbps
29 - 1472 kbps
32 - 96 kbps