Polycom CMA System Web Scheduling Guide

Setting

Description

 

 

ISDN Line Status

The status of the ISDN line. Possible values include:

 

Operational

 

Non-operations

 

This field is blank for the following device types: PVX,

 

MGC, RMX, GW/MCU, Other, and TANDBERG.

 

 

Alias Type

If the endpoint has an alias designation, the type of alias.

 

Possible types include E.164, H.323 ID, URL, Transport

 

Address, E-mail, Party Number, and Unknown.

 

 

Alias Value

Value for the alias type shown.

 

 

 

If you select Call Details, you’ll see these participant details:

Setting

Description

 

 

Video Protocol

The video connection protocol, both transmission (Tx)

 

and reception (Rx), the endpoint is using. Possible values

 

include:

 

H.261

 

 

H.261 is an ITU standard designed for two-way

 

 

communication over ISDN lines and supports data

 

 

rates which are multiples of 64Kbit/s. H.261 supports

 

 

CIF and QCIF resolutions.

 

H.263

 

 

H.263 is based on H.261 with enhancements that

 

 

improve video quality over modems. It supports CIF,

 

 

QCIF, SQCIF, 4CIF and 16CIF resolutions.

 

H.264

 

 

Video Format

The video format, both transmission (Tx) and reception

 

(Rx), the endpoint is using.

 

 

Video Rate

The video bandwidth negotiated with the far site.

 

 

Video Rate Used

The actual video bandwidth used in the call to the far site.

 

 

Video Frame Rate

Specifies the frame rate to use.

 

 

Audio Rate

The audio bandwidth negotiated with the far site

 

 

Audio Protocol

The audio connection protocol, both transmission (Tx)

 

and reception (Rx), the endpoint is using.

 

 

 

If you select Call Quality of Service, you’ll see these standard service measurements: Total Packet Loss, % Packet Loss, Audio Packet Loss, Video Packet Loss, Audio Jitter, and Video Jitter.

36

Polycom, Inc.

Page 40
Image 40
Polycom 5.3 manual MGC , RMX , GW/MCU , Other , and Tandberg