Faxing

A Make sure that Memory TX is se- lected.

2

B Place the original.

Note

❒The original can be placed ei- ther in the ADF or on the expo- sure glass, until the {Start} key is pressed.

Reference

p.13 “Placing Originals”

C Make the settings you require.

Reference

p.30 “Scan Settings”

p.31 “Original Type”

p.32 “Image Density (Con- trast)”

D Specify a destination.

Note

❒If you make a mistake, press the {Clear/Stop} key, and then enter the correct number.

Reference

p.35 “Entering a Fax Number”

p.36 “Entering an E-mail Address ”

p.37 “Entering an IP-Fax Destination ”

p.40 “Using Destination Lists”

p.47 “Chain Dial”, Facsimile Reference <Advanced Features>

p.47 “Redial”, Facsimile Reference <Advanced Features>

E When sending the same original to several destinations (broad- casting), press [Add] to specify the destinations.

Note

❒You do not have to press [Add] when adding a destination us- ing the destination list.

❒If you do not want to do a broadcast transmission, pro- ceed to step G.

20