Scan Settings

❒ When using Internet Fax transmis-

sion, documents are sent at “De-

tail” resolution, even if you have

specified “Fine”. To send a docu-

ment at “Super Fine” or “Fine”,

configure the Full Mode when reg-

istering the destinations in the Ad-

Original Type

If your original contains photo- graphs, illustrations, or diagrams with complex shading patterns or grays, select the appropriate original

dress Book. See p.55 “T.37 Full

Mode”.

type to optimize image clarity.

❖ Text

2

A Press [Resolution].B Select the resolution you require, and then press [OK].

Note

❒If you install the optional ex- pansion memory, “Super Fine” will be displayed in the Resolu- tion box.

Select [Text] to send high-contrast black-and-white image originals. Use this setting even if your original contains text and photographs, or if you only want to send clearer text.

❖ Text / Photo

Select [Text / Photo] to send an original containing both a high-contrast black-and-white image, such as text, and a halftone image, such as a photograph.

❖ Photo

Select [Photo] to send an original containing a halftone image, such as a photograph or a color original.

Note

❒If you select [Text / Photo] or [Photo], the transmission will take longer than when [Text] is selected.

❒If you send a fax message with

[Text / Photo] or [Photo] and the background of the received image is dirty, reduce the density setting and resend the fax. See p.32 “Im- age Density (Contrast)”.

❒You can set the original type that is selected right after the machine is turned on or modes are cleared, with [Original Type Priority] under Gen. Settings/Adjust. See p.144 “General Settings/Adjustment”, Facsimile Reference <Advanced Fea- tures> .

31