
Sending by
Note
❒When both the H.323 setting and SIP setting are set to ON under
Press [Protocol] to select the pro- tocol you want to use.
C To add a destination, press [Add].E Press the {Start} key.
The machine starts to scan the original and stores it in memory. When scanning ends, the Communicating indicator lights and transmission starts.
3
If you do not want to add a desti- nation, proceed to Step E.
Note
❒When using a destination list, multiple destinations are added automatically and you need not press [Add].
D Specify the next destination. Note
❒Press to switch the destina- tion between fax number, e- mail address, and
❒To add another destination, re- peat Steps C and D.
73