Faxing

-Checking the transmission settings

You can check the transmission settings (e.g. destination and transmission mode) on the display.

 

A Press the {Check Modes} key.

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZLBS040N

The following display appears.

-Broadcasting Sequence

If you dial several destinations for the same message (broadcasting), the messages are sent in the order in which they were dialed. If the fax message could not be transmitted, the machine redials that destination after the last destination specified for broadcasting. For example, if you specify four destinations, A through D, for broadcasting, and if the lines to destinations A and C are busy, the machine dials the destinations in the following order: A, B, C, D, A, and C. See p.79 “Simultaneous Broadcast”, Facsimile Reference <Advanced Fea- tures>

Note

Pressing switches the des- tination list between fax num- ber, e-mail address, and IP-Fax number.

BAfter checking the settings on the display, press the {Check Modes} key.

The display before the {Check Modes} key was pressed appears.

-Checking the transmission progress

To check the transmission progress, print the TX file list. See p.25 “Printing a List of Files in Memory (Print TX File List)”, Facsimile Reference <Ad- vanced Features> .

22