Searching for a Destination

I Press [OK].

Note

❒Although one user can program multiple e-mail addresses, only one address can be retrieved by the search. The address re- trieved by the search depends on the searching method sup- ported by the LDAP server. However, the address pro- grammed first is normally re- trieved.

❒Press [Detail] to display the de- tailed information of the select- ed destination.

When the search is finished, the search result appears.J Select a destination.

Note

❒If the required destination does not appear, press [U] or [T] to display it.

Specifying a Registration Number

Use this procedure to select a destination by specifying a registration num- ber.

A Press to switch the destination between fax number, e-mail address, and IP-Fax number.

B Press [Registration No.].The registration number entry display appears.
C Enter a registration number using the number keys.

2

Note

❒You do not need to enter the first zeros of a registration num- ber when the display prompts you to enter five digits. If you do not enter 5 digits, press the {#} key to complete the entry.

The corresponding destination ap- pears.

Note

❒Title word key is switched to the one that the specified desti- nation is programmed in.

❒If the “Cannot find the spec- ified Registration No.” message appears, the specified registration number is wrong. Press [Exit], check the registra- tion number again, and then fol-

low the procedure from step A. If the “No valid destination

under the specified No.”

message appears, the key is wrong. Press [Exit], and then follow the procedure from step

A.

49