Faxing

B Press [Manual Input].

Note

2

Note

Depending on security settings, [Manual Input] may not be dis- played , and be unable to input.

C Enter the IP-Fax destination and then press [OK].

Note

If you have set both of “Enable H.323” and “Enable SIP” pa- rameters to “On” with “IP-Fax Settings” under “Facsimile Fea- tures”, [Protocol] appears. Press this button to select a protocol to be used.

If you enter an incorrect charac- ter, press [Backspace] or [Delete All]. Then, re-enter the charac- ters correctly.

To change the IP-Fax destina- tion after pressing [OK], press [Edit Dest.], re-enter an IP-Fax destination, and then press [OK].

Reference

“Entering Text”, General Settings Guide

The destination is specified.

Press [ProgDest] in this order to store the entered IP-Fax destina- tion in the Address Book. See p.39 “Registering Entered Des- tinations to the Address Book”.

-IP-Fax Destination

Depending on the network to which this machine is connected or this ma- chine's configuration, enter the IP-Fax destination as follows:

When not using a gatekeeper/SIP server

From IP-Fax to IP-Fax

Specify the IP address or host name of the receiving machine. Example: IP address: 192.168.1.10 Exam ple: Host name: to - kyo.abc.co.jp

From IP-Fax to G3 fax

Specify the G3 fax telephone number of the receiving ma- chine.

Example :0312345678

When using a gatekeeper/SIP server

From IP-Fax to IP-Fax

Specify the alias telephone number of the receiving ma- chine.

Example: 0311119999 (alias tele- phone number)

Example: 9999 (ID number)

From IP-Fax to G3 fax

Specify the G3 fax telephone number of the receiving ma- chine.

Example) 0312345678

38