Sending Internet Fax Documents

G Select the scan settings you require.

I To send the same document to multiple destinations, press [Add].

Note

❒ When using Internet Fax trans-

Note

3

mission, documents are sent at

“Detail” resolution, even if you

specify “Super Fine”. To send

documents at “Super Fine”,

specify this resolution when

registering the destination in

the Address Book. See p.55

“T.37 Full Mode”.

Reference

p.30 “Resolution”

p.31 “Original Type”

p.32 “Image Density (Con- trast)”

H Enter the e-mail address.

If there is only one destination, proceed to step K.

Reference

p.36 “Entering an E-mail Address ”

p.40 “Using Destination Lists”

p.47 “Search by LDAP Server”

p.47 “Redial”, Facsimile Reference <Advanced Features>

❒It is not necessary to press [Add] when adding destinations using the destination list.

J Specify the next destination.

Note

❒Pressing switches the des- tination list between fax num- ber, e-mail address, and IP-Fax number.

❒To specify more destinations, repeat steps I and J.

K Press the {Start} key.

This starts reading the document into memory. The e-mail send operation starts after the read operation is complete. When scanning is complete, the Communicating indicator lights and transmission starts.

61