Guide to the Printer
Exterior: Front View
| 5 |
1 |
|
2 |
|
3 | 4 |
|
Guide to the Printer
1
6
7
8
9
10
1.Parallel Interface Port
Plug the parallel cable into this port.
2.Network Interface Port
Plug the network cable into this port.
3.Ventilator
These holes help to keep components in- side the printer from overheating. Do not lean anything against the printer, and do not block the ventilator.
4.Power Switch
Use this switch to turn the printer power on and off.
ZDEH010E
7.Operation Panel
Keys for operating the printer and a pan- el display that shows the printer status.
⇒P.8 “Operation Panel”
8.Front Cover
Open this cover to replace consumables or to view instructions for removing mis- fed paper.
9.Paper Tray
Load up to 500 sheets of plain paper (80 g/m2, 20 lb). The second tray from the top can load OHP transparencies or en- velopes.
5.Output Tray
Printed output is stacked here with the print side face down.
6.Upper Right Cover
Open the upper right cover to remove misfed paper. Remove the upper right cover to install the optional interchange unit.
10.PS440 (Optional Paper Feed Unit)
Load up to 500 sheets of plain paper in its two trays. PS440 can hold up to 1000 sheets of plain paper (80 g/m2, 20 lb). PS420 can hold up to 2000 sheets of plain paper (80 g/m2, 20 lb).
5
