Setting Up the Printer

Loading Paper in PS420

(Paper Feed Unit)

Note

You can load A4 long-edge feed

(Metric version) or 81/2" ⋅ 11"

2 long-edge feed (Inch version) size into PS420. If you want to change the paper size A4 to 81/2" ⋅ 11" (Metric version) or 81/2" ⋅ 11" to A4 (Inch version), contact your sales or service representative.

Load paper of the same size in the right and left sides of the paper feed unit.

A Slide the paper tray out until it stops.

ZAEY200E

Important

Align the paper stack so that the left stack is flush with the left side, and the right stack is flush with the right side.

Do not stack paper over the lim- it mark.

Confirm that the end fence (A) locks completely after loading the right side paper.

If you want to change the paper size, contact your sales or ser- vice representative.

Note

To avoid paper multi-feeds, shuffle sheets before setting them in the tray.

Load the paper face up onto the tray.

If either side or the leading edge of paper is curled, straighten it, and then load it.

C Slide the tray into the printer un- til it stops.

B Load paper completely into the tray.

ZAEY201E

48

Page 64
Image 64
Ricoh AP3200 setup guide Loading Paper in PS420 Paper Feed Unit, Slide the paper tray out until it stops