Installing Options

Available Options

The following options can be installed on the printer.

7 8

6

5

2

2

3

4

1

ZDEP011E

1.Paper Feed Units

Place the printer on the paper feed unit and fasten the screws that join the printer and the paper feed unit. There are two types of paper feed units that are de- scribed below. Only one of them can be installed at once.

APS440

With this option, you can load 1000 sheets.

BPS420

With this option, you can load 2000 sheets.

2.Interchange Unit Type 280

With this option, the printed paper is sent to AD380 (duplex unit) or CS370 (mail- box).

3.AD380 (Duplex Unit)

With this option, you can print on both sides of paper. Install AD380 (duplex unit) on the right side of the printer, after installing Interchange Unit Type 280.

4.Bypass Tray Type 270

With this option, you can print on thick or custom size paper. You can load 100 sheets.

5.CS370 (Mailbox)

With this option, the printed paper can be sent to four output trays. Install CS370 (mailbox) on the top of Interchange Unit Type 280, after installing Interchange Unit Type 280.

6.Bridge Unit Type 320

With this option, the printed paper is sent to SR510 (500-sheet finisher) or SR720 (1000-sheet finisher).

7.SR510 (500-sheet Finisher)

With this option, up to 500 prints can be sorted or stapled at a time. Install this op- tion on the left side of the printer, after in- stalling Bridge Unit Type 320.

8.SR720 (1000-sheet finisher)

With this option, up to 1000 prints can be sorted or stapled.

19

Page 35
Image 35
Ricoh AP3200 setup guide Available Options