Setting Up the Printer
I Close the right cover by pushing the area as shown in the illustra- tion.
2 |
ZAEP690E |
J If the duplex unit is already in- stalled, close the unit.
K Slide the four mailbox trays into the lower side of the mailbox first.
ZAEP360E |
Note
❒After installing all options, print a configuration page to confirm the installation. If the new de- vice is listed in the column of configuration options, then it has been properly installed. For more information, see P.54 “Printing a Configuration Page”.
Installing Memory Unit TypeB
Important
❒The memory unit can be damaged by small amounts of static electric- ity. Before touching it, ground yourself by touching something metal to remove static electricity from you.
Note
❒If you want to install Memory Unit TypeB and Printer Hard Disk Type 185, Memory Unit TypeB must be installed first.
A Confirm that the box contains the following item.
•Memory unit
B Turn off the printer, and remove all cables and cords from the printer.
C Use a coin to remove the six screws, and remove the printer board cover.
Note
❒The removed cover and screws are required in step E.
ZDEP100E |
40
