Installing Options
D Tilt the memory unit so that it is thirty degrees perpendicular to the slot (A), and push it forward (B). It should click into place.
ZDEP110E |
Note |
❒If the hard disk is already in- stalled, remove the hard disk first.
E Attach the printer board cover that was removed in step C, and use a coin to fasten the six screws.
ZDEP101E |
Note
❒If you are now going to install the hard disk, it is not necessary to reattach the cover.
❒After installing all options, print a configuration page to confirm the installation. If the new de- vice is listed in the column of configuration options, then it has been properly installed. For more information, see P.54 “Printing a Configuration Page”.
Installing Printer Hard Disk
Type 185
Important
❒The hard disk can be damaged by small amounts of static electricity.
Before touching it, ground your- | 2 |
self by touching something metal to remove static electricity from you.
A Confirm that the box contains the following items.
•Hard disk
•Installation Guide
B Turn off the printer, and remove all cables and cords from the printer.
C Use a coin to remove the six screws, and remove the printer board cover.
Note
❒The removed cover and screws are required in step G.
ZDEP100E |
41
