Installing Options
F Use a coin to remove the screw from the front right cover, and then remove the front right cover.
Note
❒The front right cover has a clear film to prevent the removed screw falling in the printer. Do not remove the screw from the film.
ZDEP210E |
❒The removed screw and cover are required in step K.
G Use a coin to remove the screw, and then remove the cover as shown in the illustration.
Note
❒The removed screw and cover are no longer required.
ZDEP220E |
H Return the paper sensor into the output tray as shown in the illus- tration.
2 |
ZDEP370E |
I Place the bridge unit on the out- put tray and slide the unit along the output part of the printer.
ZDEP231E |
J Fasten the two knob screws and secure the bridge unit.
ZDEP380E |
K Replace the front right cover re- moved in step F, and then fasten the screw.
35
