Ricoh AP3200 setup guide Installing PS440/PS420 Paper Feed Unit

Installing Options

Installing PS440/PS420 (Paper Feed Unit)

RCAUTION:

•Before installing options, the ma- chine should be turned off and unplugged for at least thirty min- utes. Components inside the machine become very hot, and can cause a burn injury if touched.

•When lifting the machine, use the grips on both sides. The ma- chine could break or cause an in- jury if dropped It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric shock.

•Before moving the machine, un- plug the power cord from the out- let. If the cord is unplugged abruptly, it could become dam- aged. Damaged plugs or cords can cause an electrical or fire hazard.

There are two types of paper feed units: PS440 (1000-sheet paper feed unit) and PS420 (2000-sheet paper feed unit). Only one of them can be in- stalled at once. The installation of PS440 is described below.

Important

❒You can load A4 long-edge feed (Metric version) or 81/2" ⋅ 11" long-edge feed (Inch version) size

into PS420. If you want to change

the paper size A4 to 81/2" ⋅ 11" (Metric version) or 81/2" ⋅ 11" to A4 (Inch version), contact your sales or service representative.

A Confirm that the box contains the following items.

1

2	2
3

4

5

ZAEP380E

1.Screws (4 pcs)

2.Securing brackets (2 pcs)

3.Cover 1

4.Cover 2

5.Screws (3 pcs)

•Installation Guide

Note

❒The paper size seal and the tray number seal are included only with the printer.

B Turn off the printer, and remove all cables and cords from the printer.

21