3.Configuring the Printer for the Network
Configuring the Printer for the Network with the Operation Panel
Reference
This printer contains a Network Interface Board as a standard. For more information about configur- ing for a network, see the Operat- ing Instructions for the Network Interface Board included as a PDF file on the
To use the Network Interface Board, configure it for the network using the printer's operation panel.
The following table shows the opera- tion panel settings and their defaults. These are included in the “Network Setup” menu.
Setting name | Default value |
|
|
IP Address | 011.022.033.044 |
|
|
Subnet Mask | 000.000.000.000 |
|
|
Gateway Address | 000.000.000.000 |
|
|
Access Control | 000.000.000.000 |
(Access Control Ad- |
|
dress) |
|
|
|
Access Mask | 000.000.000.000 |
(Access Control |
|
Mask) |
|
|
|
Network Boot | None |
|
|
Frame Type(NW) | Auto Select |
(Frame Type Net- |
|
Ware) |
|
|
|
ActiveProtocols | All Active |
|
|
Ethernet | Auto Select |
|
|
A Press {Menu}.
The following message appears on the panel display.
Main Menu:
Sample Print
B Press {T} or {U} until the follow- ing message appears.
Main Menu:
Network Setup
C Press {Enter #}.
The following message appears on the panel display.
Network Setup:
IP Address
63
