Setting Up the Printer |
| |
L Close the right cover by pushing |
| |
Installing SR510 | ||
the area as shown in the illustra- | ||
finisher) | ||
tion. |
2 |
ZDEP240E |
M If the duplex unit is already in- stalled, close the unit.
N Remove the adhesive tape holding the bridge unit and cable and packing material, and attach the connector to the socket on the right top side of the back of the printer.
Note
❒If you install the finisher, the bridge unit must be installed first.
A Confirm that the box contains the following items.
1
2
3
4
5
ZDEP280E
ZDEP250E
1. Finisher tray
O Attach the connecting plate as | 2. | Finisher stand | |
shown in the illustration. | 3. | Output guide | |
Note | |||
4. | Screws (2 pcs) | ||
❒ The plate is fastened with a screw | 5. | Stoppers (2 pcs) | |
when installing the finisher. |
• Installation Guide |
B Turn off the printer, and remove |
all cables and cords from the |
printer. |
ZDEP260E |
36
