
Placing Originals
Placing Originals
You can set your originals either in the Document Feeder or on the expo- sure glass. Some types of originals are unsuitable for the Document Feeder so they must be set on the exposure glass.
Which way you place your original depends on its size and whether you are using the Document Feeder or the exposure glass.
How to place A4, B5 JIS (Japanese | ||
Industrial Standard), A5, 51/2"⋅ | 81/2" | |
and 81/2"⋅ 11" size originals |
|
|
AAN055S.eps |
|
|
Where original is placed |
| |
Original | For ADF | |
Exposure glass | ||
*1 |
|
|
*2 |
|
|
|
| AAN055S |
Note
When you place originals as shown in the above illustration, the fax header will be printed on the received faxes at the destina- tion as follows:
•*1 On the top of the fax
•*2 On the left side of the fax
How to place A5, 51/2"⋅ | 81/2" and B5 | ||
JIS size originals |
| ||
AAN056S.eps |
|
| |
Original | Where original is placed | ||
Exposure glass | For ADF | ||
| |||
*2 | *3 | 2 | |
|
| ||
*1 |
|
| |
|
| AAN056S |
Note
When you place originals as shown in the above illustration, the fax header will be printed on the received faxes at the destina- tion as follows:
•*1 On the top of the fax
•*2 On the left side of the fax
•*3 When the scanning size is set to A4L or 81/2"⋅ 11"L on the original size specifying display.
When sending a fax, the image output at the other end depends on the size and orientation of paper used in the receiver's terminal. If the receiver does not use paper of the same size and orientation as that of the original, the fax image may be reduced in size, trimmed at both edges, or divided into two or more sheets. When sending an im- portant original, we recommend you ask the receiver about the size and orientation of the paper used in their terminal.
13