Faxing
Make sure that all ink, correcting fluid etc., has completely dried be- fore placing your original. If it is still wet, the exposure glass will be marked and those marks will ap- pear on the received image.
You can send the first pages from
2 | the exposure glass then the re- |
maining pages from the ADF. Af- |
ter you have removed the last page from the exposure glass, insert the remaining pages in the ADF, and then press the {Start}key.
Reference
For acceptable types of originals, see p.107 “Acceptable Types of Originals”, Facsimile Reference <Ad- vanced Features> .
Placing a Single Original on the Exposure Glass
Place originals that cannot be placed in the ADF (Auto Document Feeder), such as a book, on the exposure glass one page at a time.
A Place the original face down and align its upper left corner with the reference mark at the upper left corner of the exposure glass.
ABZ025S.eps |
ABZ025S |
1.Positioning mark
2.Left Scale
B Lower the exposure glass cover or the ADF.
Note
When setting a bound original, the received image may contain some black areas. To reduce this effect, hold down the original to prevent the bound part from rising.
Placing Originals in the ADF
Use the ADF to scan in a stack of orig- inals in one operation.
Limitation
Place all the originals to be sent in a single stack. You cannot place originals in the ADF one page at a time or in successive stacks.
Note
To send an original longer than the following lengths, use Memory Transmission. However, the maxi- mum length of an original for Memory Transmission is 1200 mm (47").
•A4 size: 600 mm (23.6") for De- tail, 300 mm (11.8") for Fine
If you frequently send long docu- ments, set Long Document Trans- mission to on with the User Parameters. If a jam occurs, the document might be damaged be- cause scanning will not stop. See p.76 “User Parameters”, Facsimile Reference <Advanced Features> (switch 14, bit 1).
If your original is bent or folded, flatten it before you place it.
When sending thin originals, place them on the exposure glass.
If an original jammed, press the {Clear/Stop} key, and then slowly remove the original.
14
