Canceling a Memory Transmission | Ricoh Facsimile Reference Basic

Canceling a Memory Transmission

Canceling a Memory Transmission

Even when fax number and e-mail address are simultaneously specified, or only e-mail address is specified, you can cancel the mode using the same procedure. However, you can- not cancel the transmission of a sent Internet Fax document.

Before the Original Is Scanned

Use this procedure to cancel a trans- mission before pressing the {Start} key.

A Press the {Clear Modes}key.

ABZ104S.eps

Note

When documents are placed in the ADF, you can cancel trans- mission simply by removing them.

While the Original Is Being

Scanned

	Use this procedure to cancel a trans-
		2
	mission after pressing the {Start}key.

A Press the {Clear/Stop}key.

ABZ105S.eps

The machine stops scanning.

Note

Scanning may be completed while you are performing the cancel operation.

While the Original Is Being

Transmitted or Before the

Transmission Is Started

Use this procedure to cancel a trans- mission after scanning finishes. While transmitting, you can cancel trans- mission by pressing the {Clear/Stop} key. After canceling, skip steps 1 and 2.

Note

If the transmission finishes while you are carrying out this proce- dure, it will not be canceled.

19

Image 27

Ricoh Facsimile Reference Basic manual Canceling a Memory Transmission, While the Original Is Being Scanned

Contents

Facsimile Reference Basic Features Operating Instructions Facsimile Reference Basic Features Introduction Canada ™ FCC Requirements Manuals for This Machine ™ Manuals for DeskTopBinder V2 Lite ™ Manuals for ScanRouter V2 Lite™ Other manuals Table of Contents When Toner Runs Out Canceling Internet Fax TransmissionInitial Settings and Adjustments Adjusting the VolumePage Remarque concernant les utilisateurs au Canada Importantes Mesures DE SÉ- Curité Important Safety Instructions Limitation How to Read This ManualSymbols Preparation Control Panel ™ Features Programmed by Default Reading the Display Reading the display and using keys Destination entry Selection keys Selectable items ™ When Internet Fax Settings is onStandby display Machine status or currently se- lected function Message ™ Reception ™ TX ModeCommunication display ™ Memory Transmission fax transmission User code entry display ™ Memory Transmission Transmission Modes Faxing 81/2 Placing Originals Placing a Single Original on the Exposure Glass Placing Originals in the ADF Limit mark Document guide Originals unsuitable for the ADF Make sure the Memory Trans. in- dicator lights Memory Transmission Make the settings you require Place the original in the ADF, or on the exposure glassSpecify a destination Press the Startkey Sending originals using the exposure glass Press the Clear/Stopkey Canceling a Memory TransmissionWhile the Original Is Being Scanned Press the Clear Modeskey Make sure that the standby dis- play appears Press Stop TXPress Delete Immediate Transmission Make sure the Memory Trans. in- dicator is offPlace the original Select the scan settings you re- quire FAX616.tif Press the Clear/Stop key, and then remove the original Canceling an Immediate TransmissionBefore You Have Pressed StartKey After You Have Pressed StartKey Resolution Scan Settings Press the Original Type key for the type you require Original Type™ Text ™ Photo Image Density Contrast When placing originals on the exposure glass When placing originals in the ADF ™ E-mail address Specifying a DestinationEntering a Fax Number ™ Fax number Press Tone PauseTone Press the On Hook Dialkey Using the Destination List Entering an E-mail AddressPress Manual Specifying a group of destinations using the Quick Dial key Specifying a destination using the Quick Dial key Press the OK key when confir- mation is complete Make sure the destination name appears on the displayPress the Check Destinationkey ™ Search by Fax Number Searching for a DestinationSearch by Destination Name ™ Search by Destination Name Select Display Destination List us Select the destination name to specify using Uor TSelect the destination you want to specify using Tor U Selecting from Destination List Specifying a Registration Number Select Search by Registration No. using Uor T Search by Fax No. confirmation Search by Fax NumberEnter a fax number to search for Press to display . Note2 Search by E-mail Address ˆ If Search by E-mail Address doesSearch by E-mail Address entry dis Select the e-mail address to speci- fy using Uor T ™ Manual Reception Switching the Reception Mode™ Auto Switch Reception Receiving a Fax in Manual Reception Mode Faxing Internet Fax Functions Using Internet Fax Functions Internet Fax Precautions Functions Not Supported by E-mail TransmissionFunctions Not Supported by E-mail Reception ™ Requesting a Reception Confirmation Full Mode™ Registering the Received Reception Confirmation Contents ™ Returning a Return Receipt Using Internet Fax Functions Transmitting Internet Fax ™ Attach Subject™ Return Receipt Enter the subject When you set an e-mail option, press TX ModeSelect Manual Input using U or T, and then press the OK key Key Press the OKkey After selecting the subject, press the OKkey Press Uor Tto select On Specify the next destination Enter the e-mail address About the E-mail Subject Confirming Reception Canceling Internet Fax Transmission Press the programmed User Func Receiving Internet FaxAuto E-mail Reception Manual E-mail Reception Press Exit Mail is in the server Message is inserted in all e- mails Received ImagesSubject Date ™ Own Fax Number facsimile number of sender Initial Settings and Adjustments™ Fax Header ™ Own Name Press the User Tools/Counterkey Programming Editing Enter an Own Name, and then press the OKkeyPress the User Tools/Counter key Deleting Select Fax Header using U or T, and then press the OKkey Display returns to that of step E Programming Fax Numbers and E-mail addresses Adjusting the Volume You can adjust the volume using Problem Solutions When Facsimile Key Is Lit in Red When Toner Runs Out Make sure that the machine is in facsimile modePress Exit, and then perform transmission operation Cancelled Error Messages and Their Meanings 14-09 Out of paper display message This table lists some common problems and their solutions Solving Problems Exceeded max. E Want Operation Reference When Things Dont Go as Expected Index Auto Reception Manual Reception Memo EN USA B168-8607