Publishing Server Configuration Information
If you change the configuration of your Primary RADIUS Server, you must publish the modified configuration so that your Replica RADIUS Servers can download the modified settings.
To publish server configuration information:
1Open the Replication panel.
2Click the Publish button on the toolbar.
This creates a file called
../rsa radius/packages/timestamp_RSA.ccmpkg (Solaris/Linux) or ..\RSA Radius\Service\packages\timestamp_RSA.ccmpkg
(Windows), where timestamp reflects the date and time the package was created.
Notifying Replica RADIUS Servers
A network administrator can manually notify a Replica RADIUS Server to download and install the current configuration package from the Primary RADIUS Server. Manual notification is useful when network issues prevent the automatic download and installation of a configuration package when it is first published, and the configuration on the Replica no longer matches the configuration on the Primary RADIUS Server.
To notify Replica RADIUS Servers that new configuration information has been published:
1Open the Replication panel.
2Select the Replica RADIUS Server you want to notify.
3Click the Notify button on the toolbar.
The Replica RADIUS Server downloads and installs its configuration package from the Primary RADIUS Server. After the package is installed, the Replica RADIUS Server is resynchronized with the Primary RADIUS Server.
RSA RADIUS Server 6.1 Administrator’s Guide | Administering RADIUS Servers | 69 |
