RSA Security 6.1 manual Changing the Name or IP Address of a Server

2Log into the Replica RADIUS Server as root (Solaris/Linux) or administrator (Windows).

3Navigate to the ..RSA Radius\Service (Windows) or

/opt/rsa/radius (Solaris/Linux) directory.

4Run the rsainstalltool (Windows) or rsaconfiguretool

(Solaris/Linux) utility with the identity option and information on where to download configuration information.

To obtain configuration from a configuration package, issue the following command:

#./rsaconfiguretool -identity REPLICA -reppkg pathname where pathname specifies the path to a replica.ccmpkg package.

To obtain configuration from the Primary RADIUS Server for the realm, issue the following command:

#./rsaconfiguretool -identity REPLICA -primary name address secret

where name specifies the DNS name of the Primary RADIUS Server, address specifies the IP address of the Primary RADIUS Server, and secret specifies the shared secret used to authenticate configuration downloads.

5Restart the updated Replica RADIUS Server so that it can load its new configuration.

After the Replica RADIUS Server is restarted, it will be re-synchronized with the current Primary RADIUS Server.

Changing the Name or IP Address of a Server

You may need to change the DNS name or IP address assigned to a Primary or backup RADIUS server if your network changes.

To change the DNS name or IP address of a Primary or Replica RADIUS Server:

1Stop the RSA RADIUS service/daemon on the RADIUS server you want to change.

2Log into the RADIUS server as root (Solaris/Linux) or administrator (Windows).

3Navigate to the ..RSA Radius\Service (Windows) or

/opt/rsa/radius (Solaris/Linux) directory.

RSA RADIUS Server 6.1 Administrator’s Guide Administering RADIUS Servers 71