2 - OPERATION
Configuration parameters per functional blocks | Default |
| value |
|
|
Equipment – Continue |
|
Alarms |
|
|
|
Alarm severity | See tables |
The severity of each alarm is configurable individually with the following | |
| |
attributes: major, major reverse, minor, minor reverse, none, none reverse |
|
|
|
Alarm Persistence |
|
Persistence for the appearance: X = 1, 3, 10 or 30s | X = 3s |
Persistence for the disappearance: Y = 01, 3, 10 or 30s | Y = 3s |
|
|
Loops |
|
|
|
Mismatch of remote indication loops 1 and 2 validated or not | Not validated |
(use of bits 1 to 4 of byte S1) |
|
|
|
Centre site (yes/no) | No |
|
|
Routing |
|
|
|
Authorization to transmit traps to the management: declaration of the |
|
manager addresses (10 addresses possible) |
|
|
|
Tables of configured static routes | Not configured |
|
|
Putting ports into service: Ethernet, PPP1, PPP2, PPP3 or PPP4 |
|
Enabled / Disabled (port by port) | Disabled |
|
|
Port addressing (port by port) : |
|
Interface IP address | 0.0.0.0 |
Subnetwork mask | 0.0.0.0 |
Destination IP address (PPP interface only) | 0.0.0.0 |
|
|
Management paths (port by port – PPP only): |
|
Options: MNGT, DCC1_A, DCC1_B, DCC1_C, DCC1_D | Not configured |
|
|
RIP routing validated or not (port by port) | Not validated |
|
|
Table 2-6 – Configuration parameters (6/6)
Installation and User Guide - N56717020101
No reproduction or communication without the written consent of SAGEM SA | Page |
