Sagem ADR 155C manual Optical specifications, Mechanical specifications, Consumption

	4 - SPECIFICATIONS
	4. SPECIFICATIONS
EQUIPMENT
Optical specifications
Interface type	IC1.1 = L1.1 + S1.1 or IC1.2 = L1.2 + S1.2
Bit rate	155.520 Mbit/s ± 20 ppm
Standard	ITU-T G.957/G.958
Encoding	Not encoded (NRZ)
Optical fiber	Single-mode (1 300 nm (IC1.1) or 1 550 nm (IC1.2),
	ITU-T G.652)
	* : It is possible to use a multi-mode optical fiber
	whose diameter is smaller than or equal to 62.5
	microns
Guaranteed attenuation	0 - 28 dB with no external attenuator
Typical range	0 - 70 km (IC1.1) or 0 - 100 km (IC1.2)
Connector	All-ceramic FC/PC
Mechanical specifications
Height	2U
Width	19" or ETSI
Depth	300 mm
Weight	6 kg approx.
Protection Class (IP)	Corresponding to the IP of the rack used
Consumption	< 40 W (to a equipped subrack of two cards
	ADR IC1.x and two cards ADR LAN)
Environmental specifications
Mechanical	ETS 300 119-4 (19") or CEI 297-3 (ETSI)
	ETS 300 019-2-3
Climatic conditions	CEI 721-1 (1993)
	ETS300 019 part 1-3, class 3.1, 3.2
Operating temperature range	- 5 °C à + 45°C
Extended operating temperature	- 25 °C to + 55°C (the MTBF [Mean Time Between
range	Failure] is significantly degraded)
Packaged transportation and	- 40°C to + 70°C
storage temperature
Relative humidity	< 85%
ESD	NF EN 50081-1,
	NF EN 50082-1 June 1992
	and ETS 300 386-1 1994
EMC (Electromagnetic Compatibility)	NF EN 55022 (1994)
	+ Additive A1 02/1996 equipment Class B
Safety	NF EN 60950 and UTE C 92130
	(the equipment does not provide the fire envelope)
Energy	ETS 300132-2
	(is VLV equipment)

Installation and User Guide - N56717020101

No reproduction or communication without the written consent of SAGEM SA Page A4-1