- N56717020101 Page A1-25
the
Installation and User Guide
Choice "5" : Logout
With the parameterization being complete, this command closes the current session.
An automatic session exit is performed after a few minutes of inactivity (time parameterizable from the manager).
Choice "4" : equipment REBOOT,
)
This command is used to perform immediate application REBOOT and to restart with )parameters already stored in the equipment .
This screen is used to view the routing table, to list the dynamic and/or static routes and also the interface configurations
1 - INSTALLATION AND COMMISSIONING
"interface" : interface used to reach the next equipment
"cost" : or "metric", number of hops to reach the destination.
From this screen, it is possible to change the existing routes, to delete them or to create new ones (the static routing is necessary if FOT155C's are present on the network or for an
)interconnection with a contiguous network). Choice "3" : Display of routing information,
No reproduction or communication without the written consent of SAGEM SA
