Sagem ADR 155C manual EOW configuration, AUX configuration, Port configuration, Admin, 01/01/1970

2 - OPERATION

Configuration parameters per functional blocks	Default
	value
OHA : OverHead Access
EOW interface operating mode :
CO (codirectional) or CT (contra-directional master)
"EOW configuration"	CT
Selection of E1/E2"	E1
AUX interface operating mode (F1);
CO (codirectional) or CT (contra-directional master)
"AUX configuration"	CT
MCF : Message Communications Function
MNGT interface operating mode ;
CO (codirectional) or CT (contra-directional master)
"P port configuration"	CO
Equipment
Session
Selection of clearance level :
Administrator	Admin
Operator
Observer
One password by clearance level	No password
(Only the administrator may modify password)
Equipment date and time	"01/01/1970"
Status of slots A, B, C, D (slot configured with an expected card)	A, C:ADR21E120
	B, D : ADRIC1.x
Monitoring
Monitoring of modules	No Monitoring
A no-monitored card is indicated in the equipment view; not monitoring a
card inhibits the entire management of the faults related to this card (card
and port)
Subrack Monitoring	Monitoring
Monitoring of ports	Monitoring
Not monitoring a port inhibits the entire management of the faults related to	for physical port
this port	No Monitoring
	for performance
Putting a card into/out of service	Service
(The card is ignored by the management function)

Table 2-5 – Configuration parameters (5/6)

Installation and User Guide - N56717020101

Page A2-6 No reproduction or communication without the written consent of SAGEM SA